16007 Plastic Deep Groove Ball Bearing

Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:18.2 Hz; Rating life coefficient, A2:1.4; Mass:6.87 kg; a:56.9 mm; Y0:0.69; Static load, C0:720 kN; Dynamic load, C:365 kN; B:44 mm; Characteristic cage frequency, FTF:0.46 Hz;

B1:30.9 mm; L:86 mm; A1:11 mm; G:M6x1; s1:24.2 mm; d1:32.4 mm; B:21.4 mm; Z:45.8 mm; N:12mm; Weight:0.59 kg;

A1:25 mm; H1:13 mm; Weight:1.15 kg; B:23.8 mm; s1:27.8 mm; N:M14; B1:35.7 mm; Designation of bearing:ES206-18G2T20; G:M6x1; S:9 mm;

Static load, C0:38 kN; Max operating temperature, Tmax:120 °C; e:0.21; Associated sleeve reference:H317X; da max:110 mm; da min:98 mm; db min:91 mm; Da max:167 mm; Y1:2.9; Nlim (oil):4,000 rpm;

d1:119 mm; C0:63.8 kN; T min.:-20 °C; Designation of bearing:EX217G2L3; d:85 mm; Weight:3.72 kg; Recommended tightening torque for set screw:33 Nm; T max.:100 °C; A5:29.8 mm; S:23.4 mm;

H2:72 mm; G:M6x1; s1:17 mm; d:25 mm; C:14 kN; Designation of housing:PA205N-; E:15 mm; A:38 mm; A1:23 mm; Weight:0.71 kg;

Characteristic cage frequency, FTF:0.44 Hz; Brand:NTN; Fatigue limit load, Cu:6.3 kN; Characteristic inner ring frequency, BPFI:10.64 Hz; Static load, C0:51.5 kN; C:14.29 mm; Nlim (grease):4,900 rpm; ra max:1.5 mm; d:41.28 mm; d1:58.5 mm;

b:17 mm; Ew:30 mm; Fw:25 mm; Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; Mass:0.02 kg; Brand:NTN; Bc:17 mm;

C:23 mm; Inner ring reference:No; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.44 Hz; Mass:0.05 kg; Characteristic rolling element frequency, BSF:8.89 Hz; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:8.89 Hz; D:37 mm; Fw:28 mm;

H:30.2 mm; N1:19 mm; L:127 mm; Recommended tightening torque for set screw:3.5 Nm; G:M6x1; d:17 mm; C:9.55 kN; T min.:-20 °C; s1:11 mm; J:95 mm;

H:98 mm; Weight:2.01 kg; T max.:100 °C; s1:34.1 mm; d1:44.1 mm; Designation of bearing:EX206G2L4; L1:225 mm; H2:41 mm; C:19.5 kN; A:21 mm;

C:25.7 kN; N1:21.5 mm; N:14mm; T max.:100 °C; d:34.92 mm; S:8.5 mm; Z:22.5 mm; A:44.5 mm; Recommended tightening torque for set screw:8 Nm; s1:16 mm;

C:35.1 kN; Designation of open end cover:SCOU210-31; A4:28 mm; A2:42.6 mm; Designation of housing:FC210N-; S:10.9 mm; Weight:2.88 kg; Z:59.8 mm; C0:23.2 kN; Dz:100 mm;

L:167 mm; L1:56 mm; J:127 mm; d1:51.1 mm; d:35 mm; C:25.7 kN; H1:19 mm; Recommended tightening torque for set screw:11.5 Nm; G:M6x1; Designation of closed end cover:SCCE207;

Weight:1.48 kg; S:8.5 mm; Designation of housing:T207-; N1:16 mm; Recommended tightening torque for set screw:8 Nm; B:32 mm; L3:64 mm; N2:37 mm; A1:12 mm; H:102 mm;