Home>Products>Needle Roller Bearings>NAX3030Z Combined Needle Roller Bearing 30x42x30mm
NAX3030Z Combined Needle Roller Bearing 30x42x30mm MODELS
Need a CAD or 3D Model?
NAX3030Z Combined Needle Roller Bearing 30x42x30mm
category
Needle Roller Bearings
NAX3030Z Combined Needle Roller Bearing 30x42x30mm SPECIFICATIONS
LET OUR NAX3030Z Combined Needle Roller Bearing 30x42x30mm EXPERTS GET YOU THE PARTS 6610 lbf radial static load capacity: YOU NEED. BEARING PRECISION AXLE CORP.
- 6610 lbf
- Round
- 2.1875 in
- UC200C4HR23
- 2.1890 in
- 9700 lbf
- 0.9450 in
- Set Screw Collar
- BEARING PRECISION AXLE CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
NAX3030Z Combined Needle Roller Bearing 30x42x30mmTechnology
- 6610 lbf
- Round
- 2.1875 in
- UC200C4HR23
- 2.1890 in
- 9700 lbf
- 0.9450 in
- Set Screw Collar
- 3.9370 in
- Contact with Slinger
NAX3030Z Combined Needle Roller Bearing 30x42x30mmDetails
NAX3030Z Combined Needle Roller Bearing 30x42x30mm Size Chart (mm/inches) | |
---|---|
Series | 595 |
Cone Part Number | 596-S |
Cup Part Number | 592-B |
Design Units | Imperial |
Bearing Weight | 6.3 lb |
Cage Type | Stamped Steel |
d | 3.4375 in |
D | 6.0000 in |
D1 - Flange Outer Diameter | 6.2460 in |
B - Cone Width | 1.4300 in |
C - Cup Width | 1.1875 in |
C1 - Cup Flange Width | 0.2500 in |
T1 - Bearing Width | 1.5625 in |
T - Bearing Width to Flange | 0.6250 in |
R - Cone Backface To Clear Radius1 | 0.14 in |
r - Cup Backface To Clear Radius2 | 0.130 in |
da - Cone Frontface Backing Diameter | 3.82 in |
db - Cone Backface Backing Diameter | 4.06 in |
Da - Cup Frontface Backing Diameter | 5.71 in |
Ab - Cage-Cone Frontface Clearance | 0.09 in |
Aa - Cage-Cone Backface Clearance | 0.15 in |
a - Effective Center Location3 | -0.1 in |
C90 - Dynamic Radial Rating (90 million revolutions)4 | 12600 lbf |
C1 - Dynamic Radial Rating (1 million revolutions)5 | 48600 lbf |
C0 - Static Radial Rating | 71600 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 9530 lbf |
K - Factor7 | 1.32 |
e - ISO Factor8 | 0.44 |
Y - ISO Factor9 | 1.36 |
G1 - Heat Generation Factor (Roller-Raceway)10 | 151 |
G2 - Heat Generation Factor (Rib-Roller End) | 38.3 |
Cg - Geometry Factor11 | 0.142 |
Contact Us
- BEARING PRECISION AXLE CORP.
- Address795 Kimberly Drive, Carol Stream, Illinois U.S.A.
- Phone(Working Time)690-5687
- Fax